In mid-November, many families take out the box of lights they put away in January from the closet. Before placing it on the tree or window, it is worth taking a few minutes to check cables, connections and bulbs. The Logroño Firefighters warn that a small damage can become a problem when the installation spends hours plugged in next to curtains, paper or other decorations.
His recommendation focuses on the details that usually go unnoticed when setting up the decoration: a bare wire, a joint made with electrical tape, or a crushed section for a piece of furniture If they appear, the solution is not to hide them behind the tree so that they cannot be seen. The installation must be in good condition before connecting it.
The warning comes from a municipal guide issued in December 2025 and is still useful this season. It does not respond to a new incident nor does it mean that all old lights are dangerous. The question is check your real status after months of storage, especially if they have been moved several times or have been rolled up tightly.
What to look at before turning them on
Firefighters advise using certified lights and carefully review those that are preserved from other years. Cables and bulbs must be in good condition. They also ask to avoid homemade splices and ensure that the assembly is stable, with well-made connections and without stepped on or pressed sections.
Power strips can help organize multiple outlets, but They should not be overloaded either.. It’s not about connecting one after the other until everything fits. La Razón has explained why concentrating too many devices on a strip can promote overheating. If there are doubts about the capacity of a socket, it is advisable to reduce the load and consult a professional.
There is also an important difference between decorating the living room and taking out a garland on the balcony: the Outdoor lighting must be designed for outdoors. A string of lights designed for a room does not have to withstand rain, humidity or temperature changes. The installation must also be well supported, without cables hanging over passage areas.
When the house is empty
The municipal recommendation is turn off the lights at night and when leaving the house; a programmer can facilitate this. It is not necessary to give up the Christmas atmosphere, but it is necessary to prevent the assembly from remaining on without anyone nearby to notice a failure.
The tree should be located away from fireplaces, stoves and other heat sources. If it is natural, the firefighters ask to check that it has not dried out too much; If it is artificial, it must be fireproof. They also advise avoiding candles or, if used, never leave them unattendedespecially when there are small children.
Anyone decorating a balcony can also review the conditions of their community of owners: placing visible decorations on the façade raises issues other than electrical safety. For home installation, the practical guideline It’s simple: check before assembling, replace damaged parts and turn off at the end of the day.